PLEASE NOTE THE RULES HAVE BEEN UPDATED FOR 2012
RESTARTS:
DUE TO EXCESSIVE JUMPS RESTARTS FROM BACK IN THE FIELD,THE SOUTHEASTERN LATE MODEL
SPORTSMAN SERIES HAS ADOPTED THE (CONE RESTART RULE).NO PASSING WILL BE ALLOWED ON
RESTARTS UNTIL ENTIRE FIELD HAS CLEARED THE START CONE.WE BELIEVE THIS RULE WILL
ELIMINATE ANY AND ALL JUMPED RESTARTS IN FUTURE EVENTS.
BODY:
ANY JIG OR CLIP CAR
ROLLCAGE:
A.ALL CARS MUST HAVE BOXED ROLL CAGE WITH 1 1/2 O.D X 083" MIN
B.MUST HAVE 3 BARS IN LEFT DOR AND 2 BARS IN RIGHT DOOR.
TIRES:
A.ANY HOOSIER SPEC OR CRATE TIRE PERMITTED.
B.CUTTING AND GROOVE PERMITTED.
C.ANY HOOSIER PERMITTED ON RIGHT REAR(RIGHT REAR ONLY)**NO HOOSIER 1200 SPECS ARE PERMITTED...THAT INCLUDES ON THE RIGHT REAR.
D.ANY OPEN TIRE AT ANY OTHER CORNER WILL RESULT IN AUTOMATIC DISQUALIFICATION!!!!
E.NO EXTRA WEIGHT REQUIRED FOR CUTTING AND GROOVING..!!
F.NO HOOSIER 1200 SPECS ARE PERMITTED.
BODIES:
A. S.A.S. LUCAS OIL
B.ALL NON -APPROVED BODIES WILL BE ASSESSED WITH A MINIMUM OF 50 LB WIEGHT PENALTY.
SPOILER:
A. ****8 INCH SPOILER ONLY*****
B.CARS WITH GM(602 AND 604 ENGINES MAY UTILIZE OR RUN A 12" REAR SPOILER
WHEELS;
A. ALUMINUM OR STEEL 14" MAX WIDTH
WHEELBASE:
A. 103 SIDE TO SIDE (1" VARIANCE)
FUEL:
A. RACING FUEL IS PERMITTED.
B.NO ALCOHOL......,NO NITRUS...
TRANSMISSION:
A.BERT AND BRINN TRANSMISSIONS ALLOWED
B.ANY TYPE OF CLUTCH IS PERMITTED.
C. MUST HAVE FORWARD AND REVERSE ..NO DIRECT DRIVES
CARBURETOR:
A.ONE FOUR -BARRELL IS PERMITTED/NO DOMINATORS
ENGINE :
A.365 CUBIC INCHES MAXIMUM
B.CAST IRON BLOCK ONLY.
C.(.60 ") OVERBORE PERMITTED
D.HIGH PERFORMANCE CAM SHAFTS PERMITTED.
E.ANY HYDRAULIC CAM PERMITTED.
F.ROLLER CAM PERMITTED( MUST ADD 50 LBS)
G.ANY WET OIL PANS PERMITTED.
H.BALANCING PERMITTED.
I.ENGINE MAY BE CROSSED FROM ONE MANFACTURER TO ANOTHER.
J.DRY SUMP PERMITTED ( ADD 50 LBS)
K. FORD(S374) SEALED RACING ENGINE PERMITTED.
ENGINE PLACEMENT:
A.ENGINE MUST NOT BE MORE THAN 2 " FROM CENTER OF FRAME RAIL.
B.ENGINE SETBACK WILL BE 6"CENTER OF TOP BALL JOINT TO MOST FORWARD
SPARK PLUG (1/2"VARIANCE)
HEADS:
A.CAST IRON ONLY(NO CC LIMIT)
B.H.P VALVE SPRINGS AND RETAINERS PERMITTED
C.TITANIUM RETAINERS PERMITTED.
D.NEEDLE BEARING ROCKER ARMS ARE PERMITTED.
E.CHEVY 23 DEGREE HEADS ONLY.ANGLE HEADS PERMITTED.
F.SCREW IN STUDS AND GUIDE PLATES ARE PREMITTED.
G.10" DEGREE FORD HEADS PERMITTED (ADD 50 LBS)
H.NATIONAL LATE MODEL SPORTSMAN SPEC HEAD PERMITTED.
I.BRODIX HEADS PERMITTED (THESE PART # ONLY>>>
FORD PART # (SPFO)
MOPAR PART# (SPMO)
CHEVY PART #(SPCH)
J.PORTING AND POLISHING PERMITTED ON STEEL HEADS ONLY (MUST ADD 50 LBS)
WEIGHT RULE:
A. 2400 POUNDS AFTER RACE
B.1 LB PER LAP BURN OFF
C.CRATE 602.(2100 LBS)
D.CRATE 604(2200 LBS)
INTAKE MANIFOLD:
A.ALUMINUM INTAKE PERMITTED.
****ENTRY FEE **(THERE IS A 60..00 ENTRY FEE FOR ALL EVENTS!!!
THERE WILL BE NO PROTESTING ALLOWED ..AFTER EACH EVENT THE RACE WINNER WILL HAVE
P& G INSPECTION PERFORMED...
